|
Our newest innovation --
The Heatwave Multi-Fuel Heater
Heatwave
Waste Oil heater
utilize
Kagi Burners
|
Fight back against high fuel cost by burning waste oil!
A great way to benefit from oil recycling.
|
|
|
The 150,000 BTU Heatwave Waste Oil Furnace
offers simplicity and accessibility for easy care. The unit
comes fully assembled and ready to set into place. The
electrical, fuel source, and chimney installation are to be arranged
after delivery. The hourly fuel usage is 1.10 gallons. The
blower pushes air approx. 40-50 feet and give a temperature rise of 70
degrees. The unit will heat a 1500-2000 sq. ft. at -10 degrees
and hold a 65 degree indoor temperature.
Shown with Optional Tank Stand
|
Model |
Heatwave 150 |
|
BTU's |
180,000 |
|
Max. Sq. Footage |
5,000 |
|
Shipping Weight |
540# |
|
Dimensions |
70"L
x
42"W x
40"H |
|
The used oil is stored
in the 270 gal fuel tank/stand. The tank allows the furnace to be out
of the way of fumes and also gives a work area for draining filters.
The oil fill door is large to accommodate a pail of oil being emptied.
The furnace auxiliary pump is mounted on the uprights of the
tank-furnace legs. The filter above the tank is a pot type filter with
cloth strainers. The tank is equipped with a drain plug on each end to empty water from beneath the oil without emptying
the oil storage. The tank is baffled and has two toe steps for easy
service. The tank is usable with Heatwave Models 150 & 250. All
furnaces require a 20 psi. compressed air source for atomizing the
used oil. |
|
Heatwave Waste Oil Heaters offer many built-in safety features
including mesh fan covers to protect fingers, safety disconnect,
safety plug, and removable side panel for easy servicing. |
 |
|
|
The 250,000 BTU Heatwave Waste Oil Furnace
uses 1.75 gal.
oil per hour.
|
Model |
Heatwave 250 |
|
BTU's |
280,000 |
|
Max. Sq. Footage |
12,000 |
|
Shipping Weight |
820# |
|
Dimensions |
80"L
x
45"W x
47"H |
|
 |
|
|
The 350 furnace is
unique in its ability to be accessed easily for cleaning . The blower
mounted on top, and equipped with an energy efficient motor, offers a
40% energy savings. Makes a small "Foot print" on the shop floor!
Heat can be piped or
used most preferably as a horizontal air heat source for large
buildings 40’x80’ in —10 to 65 degree interior temp. The unit will
dispose of 2.75 gal of waste oil per hour. The annual maintenance is
simple and requires cleaning of the fire box, disposing properly of
any solid waste accumulations. Usually a light ash is all that
remains.
|
Model |
Heatwave 350 |
|
BTU's |
380,000 |
|
Max. Sq. Footage |
15,000 |
|
Shipping Weight |
1080# |
|
Dimensions |
74"L
x
43"W x
85"H |
Heatwave Waste Oil Heaters are ETL Listed.
|
 |
|
All Models of Heatwave Waste Oil Heaters feature
dependable Kagi Burners. |
|
|
Also visit our Heatwave Web Site
For additional
information:
Phone: 888 -
475-3317
E-mail:
sales@siebringmfg.com
|
 |
©
Copyright 2003 -
Siebring Mfg. Inc. - All Rights
Reserved |
